category

                          Blog                        

Feed Inlet of Vertical Cartoning Machine

The feed of the vertical cartoning machine is generally divided into three entrances: the manual entrance, the medicine bottle entrance and the machine package box entrance. The entire process from the machine-pack box feeding to the final packaging molding can be roughly divided into four stages: unboxing, opening, filling, and closing.

The unloading action is usually by a suction cup to suck a carton from the carton feeding port, down to the main line of the carton, the carton is fixed by a guide rail and a push plate is used to open the carton. At the same time, there will be two The forward-moving card bit rises from below, jams the side of the carton from the front and rear direction, so that the box opens at a right angle and moves forward to the loading area.

After filling in the filling area, the mechanism of the machine will fold the ears into the left and right guide rails, and then perform the closing action. The mechanism before closing the lid will first bend the tongue of the box, and then a push plate pushes the lid to bend, so that the tongue is inserted into the box and locked. The closing action is a critical action, and the quality of completion has a lot to do with the structure of the carton and the accuracy of the machine adjustment.

Feed Inlet of Vertical Cartoning MachineThe working principle of the vertical cartoning machine is as follows:

(1) The vertical cartoning machine uses an automatic method to put the products into the product conveying ship, and the conveying ship is driven by the conveyor chain;

(2) The detection device detects the products in the conveying ship, controls the paper folding machine, sucks down a manual when appropriate, and folds it to the bottom of the ship with the product to be clamped;

(3) After the detection device detects the products in the ship and the instructions below the ship, it controls the suction box device to suck a carton from the box storage rack at an appropriate time, then rotate it to open it, and transport it to the corresponding belt by the box conveyor chain. The front of the ship with products and instructions;

(4) The push rod conveyor chain of the vertical cartoning machine drives the push rod to move. At the same time, the push rod pushes the product and manual into the relevant box under the action of the guide rail. The box is conveyed to the discharge port of the machine at the same time. The parts are bent, folded, and stuffed, and the box is completely sealed, thus completing the entire packaging process.

Leave a Reply

Your email address will not be published. Required fields are marked *