What to do if the performance of the cartoning machine decreases

The cartoning machine is a machine with very good performance and quality. Irregular usage, failure to maintain in time, etc. are all causes or affects the cartoning machine to fail to work normally. To be able to operate the cartoning machine steadily for a long time, it is necessary to strengthen its maintenance.

When using this kind of cartoning machine, the work efficiency is often not high due to improper operation. Today, I would like to introduce to you how to use the cartoning machine to ensure the performance of the cartoning machine.

How to ensure the performance of the cartoning machine:

1. Before use, everyone must make relevant preparations. Check whether all the safety devices have been properly configured and adjusted, and also check whether the amount of lubricating oil and air pressure are within the specified range.

2. Turn on the power, close the automatic switch in the electrical box, the touch screen is powered on, and the initial screen is displayed. Tap any point on the initial screen to enter the language selection interface, and tap the language to enter the operation interface.

3. Press and hold the oil pump button and manually add lubricating oil for about 10 seconds. You also need to pull out the hand wheel and turn the machine for 3 to 4 working cycles according to the direction of the machine. Pay attention to the operation of each part, and then put the paper box and the medicine board. , Manual, turn the hand wheel, and follow the machine’s operation to pay off and rotate. At this time, pay attention to observe the operation of each component, and adjust it in time when necessary.

The above is the use method of the cartoning machine, only daily maintenance is strengthened to ensure the performance of the cartoning machine and thus extend the service life of the cartoning machine.

What to do if the performance of the cartoning machine decreases

Leave a Reply

Your email address will not be published. Required fields are marked *